Replacement Pushbutton Switch

$8.00
Current Stock:
SKU:
RPL-PUSHSWITCH
Shipping:
Calculated at Checkout

Red SPST momentary switch for any Red Panda pedal with soft touch switches.  This switch has a shorter travel and works well for tabletop use.  It is also rugged enough for light foot pressure, so you can replace the left footswitch on your pedal to lower its profile.  It is similar to an arcade switch, but has a solid click.

This does not work with the Particle V1, Context V1, Bitmap V1, or Raster V1.  Please email support@redpandalab.com if you need a replacement switch for one of those products.

The switch is user replaceable with no soldering required.  You will need a Phillips head screwdriver and a 15mm socket, nut driver, or an adjustable wrench.

  1. Remove the 4 bottom screws and take off the bottom plate.
  2. Unplug the original switch from the circuit board.
  3. Remove the switch from the enclosure.
  4. Install the replacement switch in the enclosure.
  5. Plug in the replacement switch.
  6. Replace the bottom plate and reinstall the 4 screws.