Context can hold 127 presets in memory, accessible via the web editor, TouchOSC, or MIDI.
The first preset can be programmed and accessed on board using the PRESET switch.
- Set the controls where you want them.
- Hold the SHIFT button and press the PRESET switch. The main LED will blink once to indicate the save.
Once a preset has been saved, the PRESET switch toggles between live settings and the preset, with spillover (the previous reverb will trail off naturally as they are swapped).
The left LED will turn on when the preset is active.
Adjusting controls while a preset is active will alter the sound, but the preset is restored to its saved settings each time the PRESET button is pressed (unless you save the new sound).
Hold the footswitch to freeze the current reverb sound (preset or live settings, whichever is active). Your live signal will pass through the other reverb engine for a wet-on-wet effect.
When the footswitch is released, the live signal will go back to the original (held) reverb.
Adjusting controls during a freeze will affect the live reverb, while the frozen reverb will remain the same.
Hold the SHIFT button and press the PRESET switch to save the current settings. The main LED will blink once to indicate the save.