BLOG

Randy put together this short overview and video manual for the Radius.

Here's a 3D-printed guitar pedal stand that holds one Red Panda pedal at a 30 degree angle.  It is 3" wide with a 4.6" hold depth, so it will also work with MXR and 125B sized pedals.  I des…

We're looking for a Red Panda pedal rep available April 13th & 14th in Portland for the upcoming Synth + Pedal Expo.  If you're familiar with our current pedals and own at least one, pop…

The Radius is a stereo ring mod and frequency shifter.  Stereo tricks will come to the Radius in a future (free, USB-installable) firmware update.  None of the people recording/touring with…

We have user-installable upgrade boards for Tensors with serial number 108-066999 and below. After the upgrade, your Tensor will have the same specs as later Tensors: 9.4 second mono / 4.7 second ster…

We enjoy writing detailed owner's manuals, and there is nothing like sitting down with a new piece of gear and a nice spiral-bound manual.  But manuals are heavy to ship, consume paper, and…

The Radius will ship in January, 2024.  We were shooting for this fall, but while supply chain issues are definitely getting better, there are still some sticking points.  We get 7 component…

We definitely have heard that the Raster 2 scares people.  One of the first comments we saw on reddit was "Looks intimidating AF".  I think the Raster 2 is easy to use - once you wrap y…

Sylvie will be at the Brooklyn Synth + Pedal Expo this weekend.  We'll have two demo boards, and you can bring your own instrument (not required - we'll have synths and guitars).  Discounts…